Skip to main content
Best Answer

Delay a course until a certification expires

  • Nov 16, 2026 9:23 AM UTC
  • 4 replies
  • 21 views

Hi All

We have two courses:

First Course

A learning plan consisting of an e-learning, done first, followed by a face-to-face and when the face-to-face is completed, it generates a certificate which is valid for three years.

Second Course

A second learning plan. When the renewal is due, they just have to complete the same e-learning again to renew the certificate for another three years.

We are looking at having the following:

When the first course is completed, an enrolment rule enrols the user on the second learning plan. In the second learning plan, we have a one question survey which has to be done first. When completed it triggers the e-learning to be delayed for 34 months using options in prerequisites.

My question is, is this the best way to do this or is there a better option? We cannot seem to find a way to delay the e-learning for three years without using a prerequisite.

Best answer by Moshe.Machlav

Hi ​@Caffeine11 ,

Before building a workaround with a 1-question survey just to start a 34-month prerequisite timer, it is worth considering the two hidden traps of that setup:

  1. Reporting Clutter: Enrolling users into the Second Learning Plan immediately means they will sit in an "In Progress" status for nearly three years, skewing your compliance and completion dashboards.

  2. Broken Timers: If a learner forgets to complete that 1-question survey right away, the 34-month prerequisite countdown never starts.

When I architected a similar asymmetric certification flow at Mobileye (where initial qualification required E-Learning + Face-to-Face ILT, and renewal only required a Refresher E-Learning), we looked at three cleaner ways to handle this depending on your toolset:

1. The Cleanest Automation: Scheduled Docebo Connect Recipe (Zero "In Progress" Clutter) Since Docebo's Automatic Groups only evaluate Course enrollment status (not Certification expiration dates or Learning Plan status), you cannot natively trigger an Enrollment Rule 60 days before a certification expires. However, if you have Docebo Connect, you can automate the exact month-34 enrollment without keeping users in a waiting state for three years:

  • Trigger (Daily Schedule): Set a Docebo Connect recipe to run on a daily schedule.

  • Lookup Expiring Certifications: Query your Certification awards via the Docebo connector (or pull from a Connect Lookup Table populated by the Learner completed course / Learning plan enrollment updated webhook when they finish the First Learning Plan) to filter for learners whose expiration_date is 60 days from today (Month 34).

  • Action (Enroll & Reset): Have the recipe automatically enroll those specific users into the Second Learning Plan (or archive/reset their previous E-Learning completion and re-enroll them) on the exact day their 60-day renewal window opens. Their dashboard and your reports stay 100% clean until Month 34.

2. Native "Pull" Approach: Legacy Certifications with Multiple Awarding Items If you don't use Docebo Connect and want to rely on the native Legacy Certifications engine (Admin Menu > Legacy certifications):

  • Set the Certification validity to 3 years.

  • Under the certification's assigned items, attach both your First Learning Plan (Initial E-Learning + Face-to-Face) and your Refresher E-Learning course (or Second Learning Plan). Leave "Allow users to retake the same course or learning plan to renew" unchecked so learners are directed to the refresher item upon renewal.

  • Configure the Certification has expired notification to fire 60 days before the expiration date (and/or use the Task List widget > Certifications to renew). At month 34, the learner receives the alert with the [renew_link] shortcode and is taken directly to the refresher e-learning to renew their 3-year cycle.

3. Native "Push" Trick: Eliminate the Survey via Shared Course Completion If you don't have Docebo Connect and must use native Learning Plan Unlock intervals to push the course onto their dashboard automatically, you still do not need the 1-question survey:

  • Because course completion is shared globally across Learning Plans, simply add your Face-to-Face (ILT) course from the First Learning Plan as the first item in your Second Learning Plan (or combine all three courses into a single Learning Plan).

  • The moment your Enrollment Rule adds the user to the Second Learning Plan, Docebo already recognizes the Face-to-Face course as Completed.

  • Set the Prerequisite Unlock interval on the second course (a dedicated Refresher E-Learning course shell) to 34 months after the Face-to-Face course. The 34-month countdown starts automatically upon ILT completion with zero extra action required from the learner.

You can check the relevant documentation here:

Hope this helps you ditch the survey!

View original

4 replies

  • Novice I
  • Nov 16, 2026 1:34 PM UTC

Take this with a grain of salt, as I’m new to this product.

I’m wondering if you could use validity rules to require the learner to complete the face-to-face within a required period of time? And then the E-Learning Lesson could get a certificate attached to it that renews after 3 years? I know the renewal is attached to the face to face completion, but with a validity rule for the learning plan, maybe it would be close enough in timing?

I read that their hoping to add other course options to the new certificate, so learners can certify with one course and re-certify with another. Once that option occurs, I think that would be your answer here.

I look forward to seeing what other say and if my answer is valid...


Moshe.Machlav
Guide I
Forum|alt.badge.img+2

Hi ​@Caffeine11 ,

Before building a workaround with a 1-question survey just to start a 34-month prerequisite timer, it is worth considering the two hidden traps of that setup:

  1. Reporting Clutter: Enrolling users into the Second Learning Plan immediately means they will sit in an "In Progress" status for nearly three years, skewing your compliance and completion dashboards.

  2. Broken Timers: If a learner forgets to complete that 1-question survey right away, the 34-month prerequisite countdown never starts.

When I architected a similar asymmetric certification flow at Mobileye (where initial qualification required E-Learning + Face-to-Face ILT, and renewal only required a Refresher E-Learning), we looked at three cleaner ways to handle this depending on your toolset:

1. The Cleanest Automation: Scheduled Docebo Connect Recipe (Zero "In Progress" Clutter) Since Docebo's Automatic Groups only evaluate Course enrollment status (not Certification expiration dates or Learning Plan status), you cannot natively trigger an Enrollment Rule 60 days before a certification expires. However, if you have Docebo Connect, you can automate the exact month-34 enrollment without keeping users in a waiting state for three years:

  • Trigger (Daily Schedule): Set a Docebo Connect recipe to run on a daily schedule.

  • Lookup Expiring Certifications: Query your Certification awards via the Docebo connector (or pull from a Connect Lookup Table populated by the Learner completed course / Learning plan enrollment updated webhook when they finish the First Learning Plan) to filter for learners whose expiration_date is 60 days from today (Month 34).

  • Action (Enroll & Reset): Have the recipe automatically enroll those specific users into the Second Learning Plan (or archive/reset their previous E-Learning completion and re-enroll them) on the exact day their 60-day renewal window opens. Their dashboard and your reports stay 100% clean until Month 34.

2. Native "Pull" Approach: Legacy Certifications with Multiple Awarding Items If you don't use Docebo Connect and want to rely on the native Legacy Certifications engine (Admin Menu > Legacy certifications):

  • Set the Certification validity to 3 years.

  • Under the certification's assigned items, attach both your First Learning Plan (Initial E-Learning + Face-to-Face) and your Refresher E-Learning course (or Second Learning Plan). Leave "Allow users to retake the same course or learning plan to renew" unchecked so learners are directed to the refresher item upon renewal.

  • Configure the Certification has expired notification to fire 60 days before the expiration date (and/or use the Task List widget > Certifications to renew). At month 34, the learner receives the alert with the [renew_link] shortcode and is taken directly to the refresher e-learning to renew their 3-year cycle.

3. Native "Push" Trick: Eliminate the Survey via Shared Course Completion If you don't have Docebo Connect and must use native Learning Plan Unlock intervals to push the course onto their dashboard automatically, you still do not need the 1-question survey:

  • Because course completion is shared globally across Learning Plans, simply add your Face-to-Face (ILT) course from the First Learning Plan as the first item in your Second Learning Plan (or combine all three courses into a single Learning Plan).

  • The moment your Enrollment Rule adds the user to the Second Learning Plan, Docebo already recognizes the Face-to-Face course as Completed.

  • Set the Prerequisite Unlock interval on the second course (a dedicated Refresher E-Learning course shell) to 34 months after the Face-to-Face course. The 34-month countdown starts automatically upon ILT completion with zero extra action required from the learner.

You can check the relevant documentation here:

Hope this helps you ditch the survey!


  • Author
  • Novice III
  • Nov 17, 2026 9:07 AM UTC

Thank you for taking the time to write such a comprehensive reply. Item 3 looks like the solution I was looking for. I was missing this useful peace of info: 

  • The moment your Enrollment Rule adds the user to the Second Learning Plan, Docebo already recognizes the Face-to-Face course as Completed.

 


  • Author
  • Novice III
  • Nov 17, 2026 9:11 AM UTC

Lizhuber. Thank you as well for taking the time to respond to my query.